fiberxon proprietary and confidential, do not copy or distribute page 1 of 1 controlled electronic version. 24hrs obsolete when prin ted out without authorization. last printed 2006-11-15 04:56 features 1.0625~1.25gbps multi-rate 1550nm dfb laser and pin photodiode for 50 transmission class i laser product low emi and excellent esd protection duplex sc optical interface extended power supply +3.3/5.0v compatibility standard serial id information compatible with sff-8053 operating case temperature: 0 to +70c applications switch to switch interface switched backplane applications router/server interface other optical transmission systems standard compatible with gbic specification (sff-8053), rev 5.5 compatible with ansi specification for fibre channel compatible with ieee 802.3z compatible with fcc 47 cfr part 15, class b compatible with fda 21 cfr 1040.10 and 1040.11, class i rohs compliance description fiberxon 1.0625~1.25gbps gbic transceivers are high performance, cost effe ctive modules. they are designed for gigabit ethernet and 1x fibre channel applications from 50km. the transceiver consists of two sections: the transmitter section incorporates a highly reliable uncooled dfb laser. and the receiver section is a pin with a trans-impedance preamplifier (tia). all modules satisfy class i laser safety requirements. the standard serial id information compatible with gbic msa describes the tr ansceiver?s capabilities, standard interfaces, manufacturer and other information. the host equipment can access this information via the 2-wi re serial cmos eeprom protocol. for further information, please refer to sff-8053. nov 14, 2006 members of flexon tm family (for 50km transmission) 1.0625 1.25gbps gbic transceiver
1.25g gbic transceiver 50 km transmission preliminary datasheet nov 14, 2006 fiberxon proprietary and confidential, do not copy or distribute page 2 of 2 controlled electronic version. 24hrs obsolete when prin ted out without authorization. last printed 2006-11-15 04:56 regulatory compliance the transceivers have been tested according to amer ican and european product safety and electromagnetic compatibility regulations (see table 1). for further inform ation regarding regulatory certification, please refer to flexon tm regulatory specification and safety guidelines, or contact with fiberxon, inc. america sales office listed at the end of the documentation. table 1 - regulatory compliance feature standard performance electrostatic discharge (esd) to the electrical pins mil-std-883e method 3015.7 class 1(>500 v) electrostatic discharge (esd) to the duplex lc receptacle iec 61000-4-2 gr-1089-core compatible with standards electromagnetic interference (emi) fcc part 15 class b en55022 class b (cispr 22b) vcci class b compatible with standards immunity iec 61000-4-3 compatible with standards laser eye safety fda 21cfr 1040.10 and 1040.11 en60950, en (iec) 60825-1,2 compatible with class i laser product. tuv certificate no. 50030043 component recognition ul and csa ul file e223705 rohs 2002/95/ec 4.1&4.2 2005/747/ec compliant with standards note note: in light of item 5 in annex of 2002/95/ec, ?pb in the glass of cathode ray tubes, electronic components and fluorescent tubes.? and item 13 in annex of 2005/747/ec , ? lead and cadmium in optical and filter glass.? ,the two exemptions are being concerned for fiberxon?s transce ivers, because fiberxon?s transceivers use glass, which may contain pb, for components such as lenses , windows, isolators, and other electronic components. absolute maximum ratings absolute maximum ratings are those values beyond which damage to the devices may occur. table 2 ? absolute maximum ratings parameter symbol min. max. unit storage temperature t s -40 +85 c supply voltage v cc -0.5 6 v operating humidity - 5 95 %
1.25g gbic transceiver 50 km transmission preliminary datasheet nov 14, 2006 fiberxon proprietary and confidential, do not copy or distribute page 3 of 3 controlled electronic version. 24hrs obsolete when prin ted out without authorization. last printed 2006-11-15 04:56 recommended operating conditions table 3 - recommended operating conditions parameter symbol min. typical max. unit operating case temperature t c 0 +70 c power supply voltage v cc 3.1 5.5 v power supply current i cc 300 ma data rate 1.0625/1.25 gbps FTM-5012S-G50G (1550nm dfb and pin, 50km) table 4 ?optical and electrical characteristics parameter symbol min. typical max. unit notes transmitter centre wavelength c 1480 1550 1580 nm average output power p 0ut -5 0 dbm 1 spectral width (-20db) ? 1 nm side mode suppression ratio smsr 30 db extinction ration ex 9 db p 0ut @tx disable asserted -45 dbm 1 rise/fall time (20% 80%) t r /t f 0.26 ns 2 1.25g 0.431 total jitter 1.0625g t j 0.43 ui 1.25g 0.2 deterministic jitter 1.0625g d j 0.21 ui 3 output optical eye ieee 802.3z and ansi fibre channel compatible 4 data input swing differential v in 650 2000 mv 5 input differential impedance z in 140 150 160 ? disable 2.0 vcc+0.3 v tx disable enable 0 0.8 v fault host_v cc -0.5 host_vcc+0.3 v tx fault normal 0 0.5 v receiver centre wavelength c 1270 1620 nm receiver sensitivity -22 dbm 6 receiver overload 0 dbm return loss 12 db los de-assert los d -24 dbm los assert los a -35 dbm los hysteresis 1 4 db 1.25g 0.749 total jitter 1.0625g t j 0.61 ui 1.25g d j 0.462 ui 3
1.25g gbic transceiver 50 km transmission preliminary datasheet nov 14, 2006 fiberxon proprietary and confidential, do not copy or distribute page 4 of 4 controlled electronic version. 24hrs obsolete when prin ted out without authorization. last printed 2006-11-15 04:56 deterministic jitter 1.25g d j 0.462 ui deterministic jitter 1.0625g 0.36 data output swing differential v out 370 2000 mv 5 high host_v cc -0.5 host_vcc+0.3 v low 0 0.5 v note: 1. the optical power is launched into smf. 2. unfiltered, measured with a prbs 27-1 test pattern @1.25gbps 3. measured with a prbs 2 7 ?1 test pattern@1.25gbps, meet the specified maximum output jitter requirements if the specified maximum input jitter is present. 4. measured with a prbs 2 7 ?1 test pattern@1.25gbps. 5. pecl level, internally ac coupled and terminated. 6. worst-case extinction ration, measured with a prbs 2 7 ?1 test pattern@1.25gbps, ber 1 10 -12 . eeprom information the sff-8053 defines a 256-byte me mory map in eeprom describing th e transceiver?s capabilities, standard interfaces, manufacturer, and other information, wh ich is accessible over a 2 wire serial interface at the 8-bit address 1010000x (a0h). the memory contents refer to table 5 table 5 - eeprom serial id memory contents (a0h) addr. field size (bytes) name of field hex description 0 1 identifier 01 gbic 1 1 ext. identifier 04 mod4 2 1 connector 01 sc 3?10 8 transceiver 00 00 00 02 10 10 01 01 transmitter code 11 1 encoding 01 8b10b 12 1 br, nominal 0d 1.25gbps 13 1 reserved 00 14 1 length (9um)-km 32 50km 15 1 length (9um) ff/ff 16 1 length (50um) 00 17 1 length (62.5um) 00 18 1 length (copper) 00 19 1 reserved 00 20?35 16 vendor name 46 49 42 45 52 58 4f 4e 20 49 4e 43 2e 20 20 20 ?fiberxon inc. ?(asc ) 36 1 reserved 00 37?39 3 vendor oui 00 00 00 40?55 16 vendor pn 46 54 4d 2d 35 30 31 32 53 2d 47 35 30 47 20 20 ?FTM-5012S-G50G ? (asc ) 56?59 4 vendor rev xx xx xx xx asc ( ?31 30 20 20? means 1.0 revision) 60-61 2 reserved 00 00 62 1 reserved 00
1.25g gbic transceiver 50 km transmission preliminary datasheet nov 14, 2006 fiberxon proprietary and confidential, do not copy or distribute page 5 of 5 controlled electronic version. 24hrs obsolete when prin ted out without authorization. last printed 2006-11-15 04:56 63 1 cc base xx check sum of bytes 0 - 62 64?65 2 options 00 1a los, tx_fault and tx_disable 66 1 br, max 00 67 1 br, min 00 68?83 16 vendor sn xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx asc 84?91 8 vendor date codexx xx xx xx xx xx 20 20 year (2 bytes), month (2 bytes), day (2 bytes) 92?94 1 reserved 00 95 1 cc_ext xx check sum of bytes 64 - 94 96?255 160 vendor specific note: the ?xx? byte should be filled in according to prac tical case. for more information, please refer to the related document of sff-8053 rev 5.5. recommended interface circuit figure 1 shows the recommended interface circuit. gbic module laser driver amplifier eeprom mod_def(2) mod_def(1) mod_def(0) rx_los - rx_dat + rx_dat + tx_dat - tx_dat v dd t tx_fault tx_disable z=75 ? z=75 ? z=75 ? z=75 ? 150 ? 3 4.7k to 10k ? 4.7k to 10k ? 4.7k to 10k ? rgnd 4.7k to 10k ? host board note a serdat out + serdat out - serdat in - serdat in + note a: circuit assumes open emitter output pecl pecl note b dc +5v 150 ? dc +5v dc +5v dc +5v dc +5v 2 180 ? note b: circuit assumes high impedance internal bias @vcc-1.3v figure 1, recommended interface circuit
1.25g gbic transceiver 50 km transmission preliminary datasheet nov 14, 2006 fiberxon proprietary and confidential, do not copy or distribute page 6 of 6 controlled electronic version. 24hrs obsolete when prin ted out without authorization. last printed 2006-11-15 04:56 pin definitions figure 2 below shows the pin numbering of gbic electric al interface. the pin functions are described in tab l e 6 . figure 2, pin view table 6 ? pin function definitions pin name pin # name/function signal specification receiver signals rgnd 2, 3, 11, 14 receiver ground (may be connected with tgnd in gbic) ground, to gbic v dd r 15 receiver +3.3/5 volt (may be connected with v dd t in gbic) power, to gbic -rx_dat 12 receive data, differential pecl high speed serial, from gbic +rx_dat 13 receive data, differential pecl high speed serial, from gbic rx_los 1 receiver loss of signal, logic high, open collector compatible, 4.7k to 10k ? pull up to v dd t on host low speed, from gbic transmitter signals tgnd 8, 9, 17, 20 transmitter ground (may be connected with rgnd internally) ground, to gbic v dd t 16 transmitter +3.3/5 volt (may be connected with v dd r in gbic) power, to gbic +tx_dat 18 transmit data, differential pecl high speed serial, to gbic -tx_dat 19 transmit data, differential pecl high speed serial, to gbic tx_disable 7 transmitter disable, logic high, open collector compatible, 4.7k to 10k ? pull up to v dd t on gbic low speed, to gbic tx_fault 10 transmitter fault, logic high, open collector compatible, 4.7k to 10k ? pull up to v dd t on host low speed, from gbic
1.25g gbic transceiver 50 km transmission preliminary datasheet nov 14, 2006 fiberxon proprietary and confidential, do not copy or distribute page 7 of 7 controlled electronic version. 24hrs obsolete when prin ted out without authorization. last printed 2006-11-15 04:56 control signals mod_def(0) 4 ttl low, output mod_def(1) 5 scl serial clock signal, input mod_def(2) 6 sda serial data signal, input/output please reference sff-8053, annex d: module definition ?4? mechanical design diagram the mechanical design diagram is shown in figure 3. 3.05 1.70 12.99 57.30 8.30 65.60 12.75 37.48 27.95 11.90 9.90 30.30 30.50 33.20 25.50 figure 3, mechanical design diagram of gbic(1550nm)
1.25g gbic transceiver 50 km transmission preliminary datasheet nov 14, 2006 fiberxon proprietary and confidential, do not copy or distribute page 8 of 8 controlled electronic version. 24hrs obsolete when prin ted out without authorization. last printed 2006-11-15 04:56 ordering information ftm 5 g s 2 1 0 medium 5: 1550nm function 0: standard data rate 12: 1.25gbps receptacle s: sc package g: gbic g g: rohs compliance distance 50: 50km 50 others part no. product description FTM-5012S-G50G 1550nm, 1.0625~1.25gbps, 50km, gbic, 0c~+70c,rohs compliance related documents for further information, please refer to the following documents: flexon tm gbic installation guide flexon tm gbic application notes sff-8053, proposed specification for gbic (gigabit interface converter), rev 5.5 obtaining document you can visit our website: http://www.fiberxon.com or contact with fiberxon, inc. america sales office listed at the end of documentation to get the latest documents. revision history revision initiate review approve subject release date rev. 1a henry.xiao simon.jiang walker.wei initial datasheet nov 14, 2006
1.25g gbic transceiver 50 km transmission preliminary datasheet nov 14, 2006 fiberxon proprietary and confidential, do not copy or distribute page 9 of 9 controlled electronic version. 24hrs obsolete when prin ted out without authorization. last printed 2006-11-15 04:56 ? copyright fiberxon inc. 2006 all rights reserved. all information contained in this document is subject to change without notice. the products described in this document are not intended for use in implantation or other life support applications where malfunction may result in injury or death to persons. the information contained in this document does not af fect or change fiberxon?s product specifications or warranties. nothing in this document shall operate as an express or implied license or indemnity under the intellectual property rights of fiberxon or third parties. all information contained in this document was obtained in specific environments, and is presented as an illu stration. the results obtained in other operating environment may vary. the information contained in th is document is provided on an ?as is? basis. in no event will fiberxon be liable for damages arising directly from any use of the information contained in this document. contact u.s.a. headquarter: 5201 great america parkway, suite 340 santa clara, ca 95054 u. s. a. tel: 408-562-6288 fax: 408-562-6289 or visit our website: http://www.fiberxon.com
|
